Cantilever Rack Manufacturers in Delhi for Pipes, Bars and Timber
Try storing a six-metre pipe on ordinary shelves and the problem shows up at once. The shelf is too short, the front frame gets in the way, and the pipe ends up on the floor. A cantilever rack was built for exactly this. BrezzIndia Storage System, a Delhi company working in industrial storage since 2010, designs and supplies racks for long goods. As Cantilever Rack Manufacturers in Delhi, it can help you work out an arrangement based on the length and weight of your material.
The idea is easy to see. Vertical columns stand on a base, and horizontal arms stick out from them like shelves with no front. Material rests along its length on the arms. Because nothing blocks the front, you can slide a bar in or lift it out without tilting it around a post.
Getting the Arm Length and Spacing Right
Arms that are too short leave material unsupported at the ends. Arms that are too long add cost and take up aisle space. A useful starting point is the depth of the stock bundle plus a small margin, but the final length depends on how the load sits.
Spacing between columns matters as much. Long items need support at several points along their length, so the gap between columns has to match the stock. Thin, flexible items such as aluminium profiles sag if the supports are too far apart. Heavy bars do not sag, but they put more load on each arm.
You also have to choose between a single-sided rack and a double-sided one. Single-sided racks fit against a wall. Double-sided racks serve two aisles and make better use of an open floor, but they need access from both directions.
Typical Users of Cantilever Racking
-
Steel traders and stockyards: angles, channels, round bars and flats sorted by size.
-
Timber and plywood dealers: planks and boards separated by thickness and length.
-
Fabrication workshops: raw lengths kept next to the cutting and welding area.
-
Aluminium extrusion stores: profiles laid out without bending or scratching.
-
Conduit and pipe distributors: PVC, GI and HDPE pipes sorted by diameter.
Racks can also be set up indoors or under a covered yard shed, depending on the site and the finish chosen.
Cantilever Rack Suppliers in India: Questions Worth Asking
Cantilever structures carry load at the tip of an arm, so the numbers matter more here than on most racks. When you speak with Cantilever Rack Suppliers in India, ask for the rated load per arm, the load per column and the load for the whole section. Ask what happens to those ratings when arms are placed at different heights.
BrezzIndia Storage System can review your longest item, its weight and the area where the rack will stand. From that, the team can propose a column height, arm size and base type. Insist on a written specification, not just a product name.
Technical Specifications
-
Material: structural steel sections, with grade and wall thickness stated.
-
Arm length: chosen from the width of the stored bundle, often from around 500 mm upwards.
-
Column height: set by the roof clearance and the lifting range of the equipment.
-
Arm spacing: vertical gap between levels, planned around stock height.
-
Load rating: per arm, per column and per section.
-
Layout: single-sided or double-sided.
-
Base: plate size, floor anchoring or free-standing support.
-
Finish: powder coating, paint or another coating suited to the area.
Plan Your Long-Material Storage with us
If long stock is lying on the floor or leaning against walls, a cantilever rack is worth a look. Contact us with your material list and site sketch. Ask for a proposal that gives column height, arm length, rated loads, finish and installation details, and compare it against what you actually need to store.
Frequently Asked Questions
What is a cantilever rack?
It is a storage frame with upright columns and arms that project outward. The arms hold long items along their length.
Which materials suit this type of rack?
Pipes, rods, angles, timber, boards and aluminium profiles are common. Very flexible items may need extra arms.
Can a forklift load it?
Yes, if the aisle is wide enough and the rack was designed for mechanical handling. Side-loading trucks are often used for long items.
Are arms adjustable?
On many designs the arms can be moved up or down in set positions. Check how the connection works and what loads apply at each position.
Can I keep the rack outdoors?
It is possible with a suitable finish and protection from standing water. Discuss the site conditions before choosing a coating.
What do I need to share to get a quotation?
Give the longest and heaviest item, the quantity, the available floor space and the type of handling.
How wide should the aisle be beside a cantilever rack?
It depends on the length of the material and the vehicle that carries it. Long items often need more turning room than the rack footprint suggests.
Does a cantilever rack need bracing?
Most designs use bracing between columns to keep the structure stable. Your supplier should show where it sits and what it adds to the rating.
